- Home
- Blog Details
Modulating vs On-Off Electric Actuators: Working, Applications and Differences
- Industrial Automation / Actuators
- Oct 31, 2026
- 9 Views
Modulating vs On-Off Electric Actuators: Working, Applications and Differences
Electric actuators play an important role in industrial valve automation. They help control the opening, closing and positioning of valves in applications where manual operation is inefficient or impractical. However, not every industrial process requires the same type of actuator control.
Some applications only need a valve to open completely or close completely. Others require continuous adjustment of valve position to maintain a desired flow rate, pressure or temperature.
This is where the difference between modulating and on-off electric actuators becomes important.
Choosing the wrong actuator operating mode can affect process stability, equipment life, energy consumption and overall automation performance.
In this guide, we explain how on-off and modulating electric actuators work, their key differences, industrial applications and how to select the right configuration for your requirements.
1. What Is an On-Off Electric Actuator?
An on-off electric actuator is designed to move a valve between two defined operating positions: fully open and fully closed.
It receives an electrical command from a control panel, PLC or other automation system. Depending on the command, the actuator operates in the opening or closing direction until the required end position is reached.
Once the valve reaches its commanded position, the actuator stops.
This operating arrangement is commonly used in applications where the primary requirement is to allow or stop fluid flow rather than continuously regulate it.
How Does an On-Off Electric Actuator Work?
The operating process generally involves the following steps:
An open or close command is received from the control system.
The actuator motor starts operating in the required direction.
Internal gearing transfers motor rotation to the output shaft.
The connected valve moves towards its fully open or fully closed position.
The actuator stops when the appropriate limit switch or control mechanism detects the end position.
Depending on the actuator design, additional protection features may include torque switches, thermal protection and position indication.
Common Applications of On-Off Electric Actuators
On-off actuators are suitable for industrial applications where two-position valve operation is sufficient.
Common examples include:
Water supply and distribution systems
Industrial pipeline isolation
Cooling water systems
HVAC isolation valves
Pump inlet and outlet valves
Industrial utility lines
Automated tank filling and draining systems
General process isolation
For example, in a water distribution pipeline, an on-off electric actuator can open a valve when water supply is required and close it when the supply needs to stop.
There is no requirement to maintain the valve at multiple intermediate positions.
2. What Is a Modulating Electric Actuator?
A modulating electric actuator is designed to position a valve at different points between fully open and fully closed.
Instead of operating only in two positions, it adjusts the valve opening according to a control signal received from an automation or process control system.
This makes it suitable for applications where accurate flow regulation or process adjustment is required.
A modulating electric actuator is commonly integrated with a PLC, DCS or other process control system.
Depending on the actuator configuration, commonly used proportional control signals include:
4–20 mA
0–10 V
Other manufacturer-supported analogue or digital signals
The exact signal compatibility must be confirmed for the selected actuator.
How Does a Modulating Electric Actuator Work?
A typical modulating actuator uses a closed-loop positioning arrangement.
The operating process involves:
A control system sends a desired position signal to the actuator.
The actuator's electronic positioner interprets the incoming signal.
The positioner compares the requested position with the actual valve position.
The motor operates in the opening or closing direction to reduce the difference.
Position feedback is used to determine when the required position has been reached.
The actuator adjusts its movement according to subsequent control signals.
For example, a 4–20 mA input may be configured to represent the full valve travel:
Input signal | Target valve position |
|---|---|
4 mA | 0% |
8 mA | 25% |
12 mA | 50% |
16 mA | 75% |
20 mA | 100% |
These are illustrative values for a linear signal-to-position configuration. Actual signal scaling, calibration and fail behaviour depend on the actuator and control system.
Common Applications of Modulating Electric Actuators
Modulating actuators are suitable for industrial processes requiring variable valve positioning.
Typical applications include:
Flow regulation in water treatment plants
Pressure control in industrial pipelines
Temperature control in HVAC systems
Cooling water flow adjustment
Chemical dosing systems
Industrial process control
Boiler and power plant auxiliary systems
Automated fluid distribution systems
For example, in an industrial cooling system, a modulating actuator can adjust a suitable control valve according to the required cooling water flow.
This helps the control system maintain the desired operating conditions instead of repeatedly switching the valve between fully open and fully closed.
3. Modulating vs On-Off Electric Actuators: Key Differences
Although both actuator configurations operate electrically, their control functions and operating requirements are different.
Parameter | On-Off Actuator | Modulating Actuator |
|---|---|---|
Main function | Open and close | Adjust valve position |
Operating positions | Two defined end positions | Multiple intermediate positions |
Control method | Discrete open/close commands | Proportional positioning commands |
Typical input | Digital signals | Analogue or supported digital signals |
Position control | End-position control | Positioner-based control |
Feedback | Open/closed indication, depending on model | Actual position feedback, depending on model |
Application | Isolation | Flow and process regulation |
Operating frequency | Generally lower | Often higher |
Control system | Relay, PLC or control panel | PLC, DCS or process controller |
Actuator duty | On-off duty | Modulating duty |
The main difference is the required control behaviour.
An on-off actuator is intended to operate between defined end positions, while a modulating actuator is designed to position the valve according to changing process requirements.
4. Understanding Actuator Duty Classification
Actuator selection should not be based only on whether the application requires open-close or modulating operation.
The actuator must also be designed for the expected operating frequency and mechanical duty.
ISO 22153:2020 provides duty classifications for electric actuators used in industrial valve applications.
The main classifications include:
Class A: On-Off Duty
The actuator drives the valve through its complete travel, from fully open to fully closed or vice versa.
This classification is suitable for applications where the valve is primarily required to perform isolation or switching operations.
Class B: Inching or Positioning Duty
The actuator occasionally moves the valve to intermediate positions as well as fully open or fully closed positions.
This is useful when occasional positioning is required without frequent modulation.
Class C: Modulating Duty
The actuator frequently moves the valve to different positions between fully open and fully closed.
This classification is appropriate for applications requiring regular process adjustment.
Class D: Continuous Modulating Duty
The actuator is designed for continuous positioning requirements between the fully open and fully closed positions.
This requires an actuator specifically designed and rated for the corresponding operating duty.
Important: An actuator that supports on-off operation should not automatically be assumed suitable for frequent modulation. Its duty rating, starts per hour, motor characteristics and thermal limits must match the application.
5. Industrial Applications: When Should You Use Each Type?
The correct actuator depends on what the process needs to achieve.
Water and Wastewater Treatment
On-off actuators are commonly used for pipeline isolation, tank filling and automated water distribution.
Modulating actuators are useful when flow needs to be adjusted according to treatment requirements, tank levels or process conditions.
HVAC Systems
On-off actuators can control isolation valves and equipment switching.
Modulating actuators are useful in suitable heating and cooling systems where water flow or other process variables need to be adjusted.
Power Generation
On-off actuators are used for isolation and utility applications.
Modulating actuators can support process control applications where the position of a suitable valve needs to change according to operating conditions.
Chemical and Pharmaceutical Industries
On-off actuators can control the opening and closing of process lines.
Modulating actuators can be used for controlled flow adjustment, provided the valve, actuator and control system are designed for the required process conditions.
Oil and Gas
On-off actuators are commonly associated with automated isolation applications.
Modulating actuators are suitable for specific flow and process control applications where variable valve positioning is required.
The actuator's environmental and hazardous-area suitability must also be verified independently.
6. What Are the Important Factors When Selecting a Modulating or On-Off Actuator?
Before choosing an actuator, evaluate the following technical requirements.
1. Process Control Requirements
Determine whether the valve needs only fully open and fully closed positions or must regularly operate at intermediate positions.
This is the first and most important selection consideration.
2. Torque Requirements
The actuator must provide sufficient torque to operate the connected valve under the specified process conditions.
Consider the valve manufacturer's opening and closing torque requirements, differential pressure and appropriate sizing allowance.
3. Operating Frequency
Determine how frequently the actuator will operate.
A valve that opens and closes a few times per day has different operating requirements from a valve that changes position repeatedly throughout the day.
4. Control Signal Compatibility
For modulating applications, verify the available input and feedback signals.
Check whether the actuator supports the required 4–20 mA, 0–10 V or other specified control arrangement.
5. Position Feedback
Modulating systems generally require position feedback to confirm actual valve position and support accurate control.
Verify the available feedback configuration and its compatibility with the automation system.
6. Duty Cycle and Motor Protection
Check the actuator's permitted starts per hour, running time, duty classification and thermal protection.
Frequent operation can increase motor heating and mechanical wear if the actuator is not designed for the required duty.
7. Environmental Protection
Consider the installation environment, including dust, moisture, temperature, vibration and corrosion.
Where hazardous-area equipment is required, confirm the appropriate certification for the complete selected configuration.
7. SDTORK Electric Actuator Solutions for On-Off and Modulating Applications
SDTORK Controls Pvt. Ltd. offers electric actuator configurations for different industrial valve automation requirements.
Its quarter-turn actuator portfolio includes models supporting on-off, inching and modulating duty, depending on the selected configuration.
SD-1000 Series
The SD-1000 Series offers quarter-turn electric actuator configurations for different industrial control requirements.
According to the published product information:
On-off configurations are available with a Local Control Station.
Modulating configurations can include an integrated positioner card for proportional control and valve positioning.
Available torque ratings vary according to the selected model.
SD-1001 Series
The SD-1001 Series includes weatherproof quarter-turn electric actuator configurations.
Depending on the model, the range supports on-off, inching and modulating duty.
Published specifications include different torque ratings, motor arrangements and electrical supply options.
SD-1001-ECO Series
The SD-1001-ECO Series is designed for valve and damper automation applications.
It can be configured for:
On-off duty with a Local Control Station.
Modulating duty with an integrated positioner card.
The published product information lists reversible induction motors and multiple torque configurations. Buyers should confirm the latest model-specific ratings and available control options.
Explore the SDTORK Electric Actuator Product Range for available configurations and technical specifications.
8. Common Mistakes to Avoid During Actuator Selection
Selecting the wrong operating configuration can create problems during commissioning and normal plant operation.
Here are some common mistakes to avoid:
Selecting an on-off actuator for frequent modulation: A standard on-off actuator may not have the required motor duty or positioning capabilities for frequent movement.
Ignoring the control signal: An actuator must be compatible with the PLC, DCS or control panel signals used in the installation.
Assuming every actuator supports 4–20 mA: Analogue positioning is configuration-dependent. Always verify the input and feedback specifications.
Ignoring position feedback: Without suitable feedback, the control system may not be able to verify the actual valve position accurately.
Overlooking valve characteristics: Not every isolation valve is suitable for throttling. Confirm that the valve manufacturer permits the intended intermediate-position operation.
Ignoring operating frequency: Frequent starts and stops can increase thermal and mechanical loading. Select an actuator designed for the specified duty.
9. Frequently Asked Questions
1. What is the main difference between modulating and on-off electric actuators?
An on-off electric actuator moves a valve between fully open and fully closed positions. A modulating electric actuator adjusts the valve to intermediate positions according to a control signal.
2. Can an on-off electric actuator control flow?
An on-off actuator can start or stop flow by opening or closing the valve. However, it is not intended for frequent proportional flow regulation unless the selected actuator and valve are specifically designed for that duty.
3. What signal is commonly used for a modulating electric actuator?
A 4–20 mA analogue signal is commonly used for proportional positioning. Some actuator configurations also support 0–10 V or other signals.
4. What is the difference between inching and modulating duty?
Inching or positioning duty involves occasional movement to intermediate positions. Modulating duty involves frequent movement to different positions to regulate a process variable.
5. Can the same electric actuator support both on-off and modulating operation?
Some actuator product families offer different configurations for both operating modes. However, the required control electronics, positioner, feedback arrangement and motor duty must be confirmed for the exact model.
6. Which actuator is better for industrial flow control?
A modulating electric actuator is generally more appropriate when a suitable valve must continuously or frequently adjust flow according to process requirements. The final selection depends on valve characteristics and control system requirements.
7. Do modulating electric actuators require a PLC?
Not necessarily. They can be controlled through different compatible process controllers or automation arrangements. A PLC or DCS is commonly used in industrial installations to generate the required control signal.
Conclusion
The choice between modulating and on-off electric actuators depends on the control requirements of the industrial process.
On-off actuators are suitable for applications requiring simple opening and closing operations. Modulating actuators are designed for applications where valve position must change according to flow, pressure, temperature or other process conditions.
Before selecting an actuator, evaluate torque requirements, control signals, operating frequency, duty classification, position feedback and environmental conditions.
SDTORK Controls Pvt. Ltd. offers electric actuator configurations for different industrial valve automation requirements.
Looking for the right electric actuator for your application?
Contact SDTORK to discuss your operating requirements and identify a suitable actuator configuration.
Related Posts
- Oct 29, 2026
- SDTORK
- 10




